Salvo's design is reminiscent of the Lampo stove. The elegance of the Salvo soapstone stove lies in the harmonious arrangement of the tiles and the rounded corners. The finishing options are the classic smooth soapstone and the Grafia surface, on which irregular shimmering patterns have been crea...
| Rated power | 35.5kW |
| Heating surface | ~ 568 m²Report ~ 22,5 hFor a soapstone stove, weight is the primary indicator of heat retention time: the greater the mass, the longer the heat is released. If the manufacturer specifies a heat retention time (PURO 14: 11.5 hours, PURO 18: 16 hours, SIERA 14: 9 hours, SIERA 18: 16 hours), use that figure; otherwise, the basic duration (hours) ≈ weight (kg) / 75 × 1.28. Then adjust according to the insulation: the better the insulation, the longer the stored heat remains noticeable. Current isolation: Good. |
| Manufacturer | Tulikivi |
| Warranty | 5 years |
| Log size | 33cm |
| Vision of fire | Front window |
| Heat accumulator | Integrated |
| Flue gas outlet | Top |
| Weight | 1320kg |
| Flue Diameter | 150Ø |
| Outside air | Under and behind |
| Self-closing door | Optional |
| Reference | 32.2490 |
After a single firing, Tulikivi soapstone stores heat and then gradually releases it into the room. The graph shows the surface temperature starting from the moment the fire is lit.
The graphs compare the heights of the devices in the lineup: the taller and heavier the device, the more energy it stores and the longer it takes to discharge.
| Reference | |
|
SALVO S 18 Classic
Exhaust vent at the top
32.2490
|
32.2490 |
|
SALVO S 18 Grafia
Exhaust vent at the top
32.2491
|
32.2491 |
|
SALVO S 18 2D Classic
Smoke departure on top Tunnel version
32.2492
|
32.2492 |
|
SALVO S 18 2D Grafia
Smoke departure on top Tunnel version
32.2493
|
32.2493 |
|
SALVO S 21 Classic
Exhaust vent at the top
32.2494
|
32.2494 |
Our specialists are here to advise you and help you choose the solution that best suits your home. Contact us for personalized advice or a no-obligation quote.
Estimate the heated area based on the insulation, ceiling height, and elevation of the site.
